C 008E

  • Table top Cardioid condenser microphone,
  • 3M cable  to M/XLR,
  • integral PPA,
  • Black Nextel (available in Grey Nextel)

Desk / Table mounted low profile Boundary Layer Condenser Microphone with Half-Cardiod Polar Pattern.

  • Boundary Layer Condenser Microphone.
  • RF friendily technology offering immunity from GSM (cellphones) and other sources of frequency interference.
  • Half-Cardioid Polar Pattern.
  • Fully balanced Low profile.
  • Integrated Phantom Power Module.
  • Finish: Black Nextel®.

 

Application Designed for a wide range of speech applications including conference, lectern, theatre, places of worship and court rooms.
Type Condenser (back electret)
Polar Pattern Half-Cardioid
Frequency Response 50 Hz – 18 KHz
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 64dB (A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements 9 – 48 volts Phantom Power
Termination Male 3 Pin XLR
Finish Black Nextel®.
Dimensions 70mm (2.75″) x 22mm (0.8″)
Weight Net Weight: 0.52kg Shipping Weight: 0.54kg
Architects and engineer specifications The Condenser Microphone is a Boundary Layer design with a Half-Cardioid Polar Pattern. The Microphone is made of solid brass and capable of being mounted permanently with 2 set screws, and includes a 10 ft (3 metres) cable terminated with a male 3 Pin XLR plug. The Microphone includes an integrated Phantom Power Module that will accept 9 to 48 volts DC. Phantom Power Module also includes filters which will eliminate all GSM frequencies from 800-1200 MHz. Frequency response 50 Hz to 18 KHz; Sensitivity -37.0dB +/- 3dB @ 1KHz (0dB =1V/Pa), Impedance 200 Ohms. Total Harmonic Distortion (THD) at an operating level of 125db is no greater than 1%. The microphone also includes rubber isolators to minimise the transfer of mechanical noise from the table. Finish: Black Nextel®.