TI-500S

  • 5 Zones Integrated Amplifier

 

 

The TI-S series 5 zone mixer amplifiers are 3U mixer amplifier featuring 70V, 100V and 4-16ohm speaker outputs & 4 universal combined mic inputs of 1/4″ phone jack and XLR type. 2 line inputs by dual RCA type are also provided.

The uniqueness of this amplifier is that the 5 zone outputs with separate volume control, which

provide flexible zone control. Each 6 inputs are equipped with bass/treble tone controls.

A remote 5 zone paging console T-318 is provided for announcement and control from another

location.

Master, Mic1-4, line1-2 volume control & 6 separate treble/bass tone control for each input are

provided, along with mic 1 of priority over other inputs. Each channel input with separate treble

and bass control.

Built-in sire for fire alarm system, EMC input, built-in chime, 2/4 tone chime selector, chime remote trigger. The TEL input could be used as telephone paging system over PA system.

The REC output for tape recorder and PRE output, AMP input for adding extra signal processor like mixer, graphic equalizer.

Complete protection includes short circuit and thermal protection, current limiter and overloading.

 

Model   TI-500S
Amplifier Section(4ΩLoad Output) Rated Output Power (THD 1%) 500W(RMS)
Speaker Zone 1~5 Output 100W MAX
 

Mic Input Section(Mic 1~4 In@1KHz)

Input Sensitivity/Impedance 5mV 600Ω-245mV 5KΩBAL
S/N Ratio Better than 55dB
Frequency Response (±3dB) 50Hz~20,000 Hz
Tone Control (Bass:100Hz, Treble:10KHz) ±10dB
Phantom Power + 48V
 

 

Line Input Section

(Mic 1~2 In@1KHz)

 

Input Sensitivity/Impedance 350mV/47KΩ
S/N Better than 65dB
Frequency Response (±3dB) 50Hz~20,000 Hz
Tone Control (Bass: 100Hz,Treble:10KHz) ±10dB
 

Tel Audio Input

 

Input Sensitivity/Impedance 0.775V/10KΩ
S/N Better than 65dB
Frequency Response (±3dB) 50Hz~20,000 Hz
 

EMC Audio Input

 

Input Sensitivity/Impedance 0.775V/10KΩ
S/N Better than 65dB
Frequency Response (±3dB) 50Hz~20,000 Hz
Pre Amp Out(Mic 1~4, Line 1~2, Tel In, Remote In) 1V/600Ω
Remote MIC Sensitivity/Impedance 775mV/10KΩ
THD Less than 0.1% at 1KHz, 1/3 rated power
Power Supply ~110V/60Hz or ~230V/50Hz & DC 24V
Power Consumption 800W
Weight 24.3Kg